Programmer Series
   LabTool-S100
 
PC based Serial Flash Programmer
LT-S100
LabTool-T400
  • PC based USB interface serial flash programmer, support 3.3V to 1.8V Flash in VCC and I/O.
  • High programming speed, it can program at 30Mbps, it blank checking, programming and verify a 64Mb serial flash in 53 second.
  • Support all maker's serial flash chip from 512Kb up to 2Gb.
  • USB interface : support both USB 1.1 and 2.0.
  • Friendly user interface, it has same Labtool family user interface.
  • Device insertion / continuity check before programming.
  • Mass production mode and quantity / Max failure rate alarm for production.
  • Support Windows XP / Vista / 7 / 8 .1 / 10
  • On board serial flash ISP programming through flat cable.
  • Support all package through adapters (refer to LabTool-S100 adapter list)
  • Affordable price with unbeatable performance.
  • LabTool-S100 using the internal USB power, don't need extra power supply.
  • Multi-LabTool-S100 can be connect to one PC through USB Hub, with this set up.
  • (more)
   LabTool-T400
 
Turbo Flash Gang Programmer
LT-T400
   LabTool-T400 Option 100
Single Socket Turbo Flash Programmer
LT-T100
LabTool-T400
  • Support 3.3V to 1.2V flash memory chip in VCC and I/O without low voltage converter.
  • Flash chip support up to 128G bit.
  • Extremely high speed: it blank check a 64M bit flash chip in 1.6 seconds, program the STM28W640CT (4 word programming algorithm) within 11.5 seconds, verify within 3.2 seconds.
  • USB interface: support USB 1.1 or 2.0
  • One PC can connect up to 16 unit Labtool-T400 to perform Asynchronous programming
  • Device insertion /continuity check before programming.
  • Target quantity and Max failure rate alarm.
  • Supports Windows 98SE / ME / 2000 / XP / Vista(32bit) / 7 / 8.1 / 10
  • 1 year warranty
  • (more)
   LabTool-48UXP
 
Intelligent Universal Programmer
LT-48UXP
LabTool-48UXP
  • USB or parallel port interface with auto-switch power
  • Support 5V and 3.3V low voltage devices, 1.8V chip support through low voltage adapter.
  • Less then 2 seconds per Mbit Programming speed for high density flash chip.
  • No adapter required for DIL chip up to 48-pin
  • 48-pin universal pin driver and current limit
  • Auto-sense/ Self programming with statistical report
  • Device insertion /continuity check
  • Universal adapter for 44-pin PLCC/ QFP/ TQFP/PSOP and 40/48 TSOP
  • Supports OS : Windows 95 / 98 / Me / NT / 2000 / XP / Vista(32bit) / 7(32bit) / 8(32bit) / 8.1(32bit) / 10(32bit) (Parallel port)
    Windows 98SE / Me / 2000 / XP / Vista(32bit) / 7 / 8 / 8.1 / 10 (USB port)
  • Automatic EPROM/ Flash ID search
  • Serialization for Memory/μP chip
  • Memory buffer H / L byte swap
  • Project file save / load function
  • User-selectable verify Vcc with one or two-pass verify voltage
  • Automatic file format detection and conversion
  • User-changeable programming parameters
  • 1 years warranty
  • Software update via web
  • (more)
 
   LabTool-848XP
 
Tubo Gang Programmer
LT-848XP
LabTool-848XP
  • Auto-sense, self-start with standard/semi-concurrent mode
  • Independent modules allow flexible configuration
  • Universal adapters for 48TSOP/44PSOP/40TSOP Flash chips support
  • Customized MCU support
  • Device insertion and continuity test
  • Project file save/load function
  • USB or parallel port interface with auto-switch power supply
  • Supports OS : Windows 2000 / XP / Vista(32bit) / 7(32bit) / 8.1(32bit) / 10(32bit) (Parallel port)
    Windows 2000 / XP / Vista(32bit) / 7 / 8.1 / 10 (USB port)
  • 1 year warranty
  • Software update via Internet
  • (more)
 
Adapter

Adapter

  • SOIC: 150 / 200 / 300mil Body, 1.27mm Pitch
  • SSOP: 150 / 200mil Body, 0.65mm Pitch
  • TSOP: 28 / 32 / 40 / 48 / 56pin, 14mm Body, 0.5mm Pitch
  • TSOP: 32 / 40 / 48 / 56pin, 20mm Body, 0.5mm Pitch
  • TSSOP: 16 / 28 / 40 / 48pin, 14mm Body, 0.4mm Pitch
  • PLCC: 20 / 28 / 32 / 44 / 52 / 68 / 84pin
  • QFP / TQFP: 44 / 64 / 80 / 100pin
  • QFN / MLF: 24pin, 0.5mm Pitch / 28pin, 0.65mm Pitch / 44pin, 0.65mm Pitch
    48pin, 0.65mm Pitch / 64pin, 0.5mm Pitch
  • BGA: WFBGA, 0.5mm Pitch / FSBGA, 0.65mm Pitch / uBGA, 0.75mm Pitch / FBGA, 0.8mm Pitch
    EBGA, 1.0mm Pitch
  • (more)