LabTool-S100   (LT-S100)
Serial Flash Programmer
( SPI Programmer )
LabTool-T400PC based USB interface serial flash programmer, support 3.3V to 1.8V Flash in VCC and I/O. High programming speed, it can program at 30Mbps, it blank checking, programming and verify a 64 Mb serial flash in 53 second. Support all maker's serial flash chip from 512Kb up to 2Gb... (more)
 
LabTool-T400 Option 100   (LT-T100)
Single Socket NAND Flash Programmer
Low Voltage (1.2V ~ 1.8V) / NAND Flash
LabTool-T400The LabTool-T400 Option 100 is a shirk version of LabTool-T400 with affordable price. The Option 100 remove three set of pin driver on T400 only one set pin driver left on T400 , The LabTool-T400 Option 100 is idea solution to customer in R/D who need to program very high density Flash chip with low voltage such as 3.3V , 1.8V and 1.2V. those high density and low voltage do not support by Labtool-48UXP... (more)
 
LabTool-T400   (LT-T400)
Turbo NAND Flash Gang Programmer
Low Voltage (1.2V ~ 1.8V) / NAND Flash
LabTool-T400LabTool-T400 Turbo flash gang programmer is four sockets PC-based gang programmer. It features four independent isolated modules, extremely high speed in writing flash memory chip. It supports 3.3V, 2.7V, 1.8V and 1.2V chip in both VCC and VIO without low voltage converter and handles 8/16/32 bits flash chip in different package through adapter modules, up to 128Gb flash can be support ... (more)
 
LabTool-48UXP   (LT-48UXP)
Intelligent Universal Programmer
LabTool-48UXPThe LabTool-48UXP is a universal programmer, which works through your PC's USB port or parallel port. It features a 48-pin universal pin driver and an expandable TTL pin driver. It supports over 10,000 different devices (including memory, logic and single chip) in current software release, new chip will add to the support in quarterly based software update ... (more)
 
LabTool-848XP   (LT-848XP)
Turbo Gang Programmer
LabTool-848XPThe LabTool-848XP is a gang programmer, which works through your PC's USB port or parallel port. It features 8 pcs fully isolated 48 pin ZIF socket, extremely high throughput, standard 5V and 3V chip support, device insertion and continuity check ... (more)
 
Phase out products
LabTool-148C / LabTool-40S / LabTool-41S
LabTool-48 : Replaced by LabTool-48UXP (Upgrade Kit)
LabTool-48XP : Replaced by LabTool-48UXP (Upgrade Kit)
LabTool-848 : Replaced by LabTool-848XP (Upgrade Kit)
Fake LabTool-48XP/UXP !!
Those fake LabTool-48XP/UXP are selling through eBay web store (http://myworld.ebay.com.hk/toolssales ) with very low price ... (more)
 
Adapters for Programmer
轉接座
There are adapters support devices with different package from DIL ... (more)
Pin Swapping Table (Universal Adapter)
 
Best view : 800 x 600
at both IE 6.0, Netscape 7.0
<< Welcome to Advantech Equipment Corp. >>

LabTool-48UXP Software v11.20 (01/18/2018) ...
LabTool-848XP Software v8.90 (01/18/2018) ...
LabTool-T400 Software v6.60 (01/18/2018) ...
LabTool-S100 Software v3.30 (01/18/2018) ...

LabTool-48UXP Software v8.32.03 (2/8/2011) ...
LabTool-848 Software v6.03 (1/25/2011) ...

Security Check Error On Fake LabTool-48XP/48UXP ...
Obsolete the LabTool-148C (10/24/2006) ...
RoHS/WEEE compliance of Advantech Equipment Corp products (8/18/2006) ...